FREE SHIPPING
Continental USA
Triangle - Solstice 8 3-Way Hi-Fi Floorstanding Speaker (Pair)
SKU
TR-SOLSTICE-8
This new release item has low inventory. If your order cannot be fulfilled immediately, it will be reserved for the next incoming shipment in November. For more information and to check availability prior to ordering, please send us a message. Or, call 877-370-1972. Thank you.
Triangle - Solstice 8 3-Way Hi-Fi Floorstanding Speaker (Pair) is available to buy in increments of 1
No further discounts or coupons apply.
FREE delivery OVER $35 (USA ONLY)
30-day return
Triangle - Solstice 8 - 3-Way Hi-Fi Floorstanding Speaker (Pair)
The Triangle Solstice 8 is a 3-way floorstanding loudspeaker designed to combine authoritative bass, natural tonal balance, and an expansive stereo soundstage. Engineered for medium-to-large listening rooms, it delivers the scale and energy required for orchestral music, rock, electronic recordings, and movie soundtracks while preserving subtle instrumental textures and vocal detail. Its 91dB sensitivity and 8-Ohm nominal impedance allow the speaker to perform effectively with a broad selection of integrated amplifiers, stereo receivers, and separate power amplifiers.
High frequencies are reproduced by Triangle’s TZ2540MG tweeter, which combines a 25mm magnesium-alloy dome with a newly developed phase plug and barrel-shaped horn. The revised design promotes controlled dispersion and a wide listening area, while the 6.5-inch natural-cellulose midrange driver provides realistic timbre and articulate vocal reproduction. Two 6.5-inch concave paper woofers extend response to 38Hz, providing a strong low-frequency foundation without sacrificing speed or definition.
The cabinet and base have also been engineered to manage resonance and airflow. A concealed laminar bass-reflex port reduces turbulence, while a cast-iron honeycomb base covered with silicone helps absorb vibration and mechanically decouple the enclosure from the floor. The base tilts the speaker backward by two degrees to optimize directionality and broaden the listening field, and adjustable spikes provide stable placement on different surfaces. Dual binding posts support single wiring, bi-wiring, and bi-amplification for flexible integration into high-fidelity or home theater systems.
FEATURES:
- 3-way floorstanding loudspeaker for high-fidelity and home theater systems
- New TZ2540MG horn-loaded tweeter with a 25mm magnesium-alloy dome
- Barrel-shaped horn profile improves high-frequency dispersion
- Redesigned phase plug promotes a wider and more consistent listening area
- 6.5" natural-cellulose midrange driver delivers clear and natural vocal reproduction
- Dual 6.5" concave paper-cone woofers provide powerful and controlled bass
- Dust-cap-free woofer design increases usable cone surface area
- Die-cast aluminum driver baskets provide a rigid, acoustically neutral structure
- Hidden laminar bass-reflex port reduces airflow noise and improves bass control
- High-density MDF cabinet helps minimize resonance and unwanted coloration
- Rounded cabinet edges support smooth and uniform sound dispersion
- DVAS architecture helps control the transfer of mechanical energy
- Dual-material base combines cast iron and silicone for vibration isolation
- 2-degree cabinet inclination widens the listening field and optimizes directionality
- Adjustable metal spikes and counter-spikes provide stable floor placement
- Dual binding posts support single wiring, bi-wiring, or bi-amplification
- 91dB sensitivity allows efficient operation with a wide range of amplifiers
- 130W RMS power handling supports dynamic music and movie playback
- Recommended for listening rooms measuring approximately 15 to 50m²
- Included Accessories: Protective Grille, Base, Mounting Screws, Adjustable Spikes, Counter-Spikes, Allen Key, and Silicone Caps
- Recommended Room Size: 161-538 sq. ft. (15-50m²)
- Available in Teak, Birch, Black Ash, and White finishes
SPECIFICATIONS:
| Product Type | Passive Floorstanding Speaker |
|---|---|
| Enclosure Type | Bass-Reflex with Hidden Laminar Port |
| Crossover Design | 3-Way |
| Number of Drivers | 4 |
| Tweeter | 1 x 1" (25mm) Magnesium-Alloy Barrel-Type Horn Tweeter |
| Midrange Driver | 1 x 6.5" (160mm) Natural-Cellulose Pulp Driver |
| Woofer | 2 x 6.5" (160mm) Concave Paper-Cone Drivers without Dust Caps |
| Sensitivity | 91dB/W/m |
| Frequency Response | 38Hz-22kHz, ±3dB |
| Nominal Impedance | 8 Ohms |
| Minimum Impedance | 3.6 Ohms |
| Power Handling | 130W RMS |
| Recommended Amplifier Power | 60-200W RMS per Channel into 8 Ohms |
| Crossover Frequencies | 250Hz and 3.7kHz |
| Low-Frequency Filter | 2nd-Order Low-Pass |
| Midrange Filter | 2nd-Order Band-Pass |
| High-Frequency Filter | 3rd-Order High-Pass |
| Base Inclination | 2 Degrees |
| Dimensions (W x H x D) | 12.1" x 42.3" x 15.5" (308mm x 1075mm x 394mm) |
| Packaging Dimensions (W x H x D) | 45.6" x 18.9" x 15.0" (1160mm x 480mm x 380mm) |
| Net Weight | 67.0 lbs. (30.4kg) Each |
| Gross Weight | 80.0 lbs. (37kg) Each |
| Warranty | Two Years (5 years with registration) |
Write Your Own Review
