FREE SHIPPING
On most orders over $35.
Eversolo - AMP-F2 - Class D Stereo Power Amplifier
SKU
EVS-AMP-F2
Eversolo - AMP-F2 - Class D Stereo Power Amplifier is available to buy in increments of 1
No further discounts or coupons apply.
FREE delivery OVER $35 (USA ONLY)
30-day return
Eversolo - AMP-F2 - Class D Stereo Power Amplifier
The Eversolo AMP-F2 is a compact Class D stereo power amplifier developed in collaboration with Starke Sound. Designed to complement Eversolo’s network music players and DAC-preamplifiers, it provides substantial output power without requiring the cabinet space of a conventional full-size amplifier. Its understated aluminum enclosure, fanless operation and matching proportions make it especially well suited to streamlined two-channel audio systems.
A Starke Sound NS600 amplifier module and newly designed 600W SAPS audio-specific switch-mode power supply form the foundation of the AMP-F2. The amplifier delivers 145W per channel into 8 Ohms and 250W per channel into 4 Ohms, with a maximum current capability of 16.5A per channel. Fully balanced circuitry, a signal-to-noise ratio greater than 110dB and distortion rated at 0.003% at 10W help provide a quiet background, precise detail and controlled dynamic reproduction.
Balanced XLR and unbalanced RCA inputs allow the AMP-F2 to connect with a wide selection of preamplifiers, DACs and network streamers. It can operate as a conventional 2-channel stereo amplifier or be switched into bridged mono mode when greater single-channel power is required. Custom beryllium-copper speaker terminals provide secure connections, while 12V trigger input and output connections allow synchronized power control with compatible source components and additional amplifiers.
FEATURES:
- Compact 2-channel Class D power amplifier for high-fidelity audio systems
- Developed through a collaboration between Eversolo and Starke Sound
- Starke Sound NS600 amplifier module provides efficient, high-current performance
- Switching frequency of up to 600kHz supports accurate signal reproduction
- Delivers 145W per channel into 8 Ohms
- Delivers 250W per channel into 4 Ohms
- Bridgeable design supports powerful single-channel mono operation
- Provides up to 450W in bridged mode
- Fully balanced circuit architecture helps reduce noise and interference
- Balanced XLR and unbalanced RCA inputs accommodate compatible preamplifiers
- Individual input selectors simplify balanced or unbalanced system configuration
- SAPS audio-specific switch-mode power supply delivers up to 600W
- Signal-to-noise ratio greater than 110dB supports a quiet background
- Maximum output current reaches 16.5A per channel or 33A bridged
- Custom Starke Sound beryllium-copper binding posts provide secure connections
- Fanless design eliminates mechanical fan noise during operation
- Low standby and idle power consumption improve operating efficiency
- 12V trigger input and output provide synchronized system control
- Shielded aluminum chassis helps protect circuitry from external interference
- Compact dimensions visually complement Eversolo DMP-series components
- Included: AC Power Cord and Trigger Cable
SPECIFICATIONS:
| Product Type | Class D Stereo Power Amplifier |
|---|---|
| Amplifier Module | Starke Sound NS600 |
| Amplifier Type | Class D |
| Number of Channels | 2 |
| Operating Modes | Stereo or Bridged Mono |
| Switching Frequency | Up to 600kHz |
| Stereo Output Power | 145W RMS per Channel into 8 Ohms at 1% THD |
| Stereo Output Power | 250W RMS per Channel into 4 Ohms at 1% THD |
| Bridged Output Power | 280W RMS into 4 Ohms at 1% THD |
| Bridged Output Power | 450W RMS into 2 Ohms at 1% THD |
| Gain | 21.5dB |
| Frequency Response | 10Hz-20kHz, -1dB |
| Signal-to-Noise Ratio | Greater Than 110dB, A-Weighted at 250W into 4 Ohms |
| THD | 0.003% at 10W, 1kHz |
| Maximum Output Current | 16.5A per Channel; 33A Bridged |
| Analog Audio Inputs | 2-Channel Balanced XLR and Unbalanced RCA |
| RCA Input Impedance | 11k Ohms |
| XLR Input Impedance | 22k Ohms |
| Input Sensitivity | 2.7V |
| Output Terminals | 2 Pairs of Starke Sound Beryllium-Copper Binding Posts |
| Output Impedance | 0.136 Ohms from 5Hz-100kHz |
| Minimum Load Impedance | 0.8 Ohms |
| Circuit Design | Fully Balanced |
| Power Supply | 600W SAPS Audio-Specific Switch-Mode Power Supply |
| Trigger Connections | 12V Trigger Input and Output |
| Trigger Rating | Up to 12V DC/150mA |
| Heat Output | 65 BTU per Hour |
| Cooling | Fanless |
| Standby Power Consumption | 0.5W or Less |
| Idle Power Consumption | 14W or Less |
| Maximum Power Consumption | 900W |
| Power Requirements | 110-120V or 220-240V AC, Switchable |
| Chassis Material | Shielded Aluminum |
| Dimensions (W x D x H) | 10.6" x 8.9" x 3.5" (270mm x 228mm x 90mm) with Feet |
| Weight | 8.0 lbs. (3.6kg) |
| Shipping Weight | 13.0 lbs. (5.9kg) |
| Warranty | One Year |
DOWNLOADS:
Write Your Own Review
