FREE SHIPPING
On most orders over $35.
Eversolo - AMP-F10 - Class AB Stereo Power Amplifier
SKU
EVS-AMP-F10
Eversolo - AMP-F10 - Class AB Stereo Power Amplifier is available to buy in increments of 1
No further discounts or coupons apply.
FREE delivery OVER $35 (USA ONLY)
30-day return
Eversolo - AMP-F10 - Class AB Stereo Power Amplifier
The Eversolo AMP-F10 is a high-current stereo power amplifier designed to deliver authoritative output, wide dynamic range, and precise loudspeaker control. Its Class AB architecture incorporates Class A bias at lower power levels, combining the smooth, refined character associated with Class A operation with the efficiency and output capability of Class AB amplification. Independent left- and right-channel circuitry helps preserve stereo separation, imaging, and musical detail across a wide range of listening levels.
In stereo mode, the AMP-F10 delivers 200W per channel into 8 Ohms, 320W per channel into 4 Ohms, and 450W per channel into 2 Ohms. For systems requiring even greater output, bridged operation provides up to 650W into 8 Ohms or 950W into 4 Ohms. A damping factor greater than 600 helps maintain firm control over demanding loudspeaker drivers, while large heat sinks and overcurrent, overheating, and short-circuit protection support reliable operation during extended listening sessions.
Balanced XLR and unbalanced RCA inputs make the AMP-F10 compatible with a broad selection of preamplifiers, DACs, and music streamers. Selectable 23dB and 29dB gain settings allow the amplifier to be matched more closely to the output level of the connected source and the sensitivity of the loudspeakers. Trigger input and output connections simplify system integration, while signal-sensing standby, illuminated analog VU meters, heavy-duty speaker terminals, and a substantial aluminum chassis complete a power amplifier suited to both high-performance stereo and home theater installations.
FEATURES:
- Class AB power amplifier with Class A bias at lower output levels
- Delivers 200W per channel into 8 Ohms
- Delivers 320W per channel into 4 Ohms
- Delivers 450W per channel into 2 Ohms
- Bridge mode provides up to 650W into 8 Ohms
- Bridge mode provides up to 950W into 4 Ohms
- Independent left- and right-channel circuitry improves stereo separation
- Five matched pairs of high-current power transistors per channel
- Large-capacity linear power supply supports demanding dynamic passages
- Dual-channel analog VU meters display amplifier output levels
- Selectable 23dB and 29dB gain settings
- Switchable stereo and bridged operating modes
- Damping factor greater than 600 provides precise speaker control
- Large heat sinks provide efficient passive thermal management
- Overcurrent, overheating, and short-circuit protection
- Signal-sensing standby mode activates after approximately 20 minutes
- 5V-12V trigger input and output support synchronized system operation
- Heavy-duty speaker binding posts accommodate secure cable connections
- Rigid aluminum chassis helps reduce vibration and external interference
SPECIFICATIONS:
| Product Type | Class AB Stereo Power Amplifier |
|---|---|
| Operating Mode | Class AB with Class A Bias |
| Continuous Output Power | 200W RMS per Channel at 8 Ohms |
| Continuous Output Power | 320W RMS per Channel at 4 Ohms |
| Continuous Output Power | 450W RMS per Channel at 2 Ohms |
| Bridged Output Power | 650W RMS at 8 Ohms |
| Bridged Output Power | 950W RMS at 4 Ohms |
| Audio Inputs | Balanced XLR and Unbalanced RCA |
| Input Impedance | XLR: 10k Ohms; RCA: 10k Ohms |
| Gain Settings | 23dB or 29dB |
| XLR Input Sensitivity | 5.2V at 23dB Gain; 2.4V at 29dB Gain |
| RCA Input Sensitivity | 2.65V at 23dB Gain; 1.3V at 29dB Gain |
| THD+N | 0.008% at 1kHz |
| Signal-to-Noise Ratio | 113dB or Greater, A-Weighted |
| Frequency Response | 10Hz-30kHz, ±0.5dB at 1W into 8 Ohms |
| Crosstalk | -95dB or Less at 200W into 8 Ohms, 1kHz |
| Damping Factor | Greater Than 600 at 8 Ohms, 1kHz |
| Operating Modes | Stereo or Bridged Mono |
| Trigger Connections | 5V-12V Trigger Input and Output |
| Automatic Standby | Approximately 20 Minutes Without an Audio Signal |
| Protection | Overcurrent, Overheating, and Short-Circuit Protection |
| Power Requirements | 110-120V AC, 60Hz or 220-240V AC, 50Hz |
| Maximum Power Consumption | 1200W |
| Dimensions (W x D x H) | 16.9" x 12.2" x 5.7" (430mm x 310mm x 147mm) |
| Net Weight | 39.7 lbs. (18kg) |
| Gross Weight | 47.4 lbs. (21.5kg) |
| Shipping Weight | 53.0 lbs. (24.0kg) |
| Warranty | One Year |
DOWNLOADS:
Write Your Own Review
