Beyerdynamic - TG D71 - Boundary Drum Microphone
Beyerdynamic - TG D71 - Boundary Drum Microphone
The Beyerdynamic TG D71 is a rugged condenser boundary microphone engineered for precision low-frequency capture. Its half-cardioid polar pattern ensures maximum gain before feedback while delivering natural, powerful sound reproduction. Optimized for bass drums, cajons, and other percussion instruments, the TG D71 is designed for easy placement without additional mounting equipment. A non-slip rubber bottom ensures secure positioning inside the drum, while its compact, slim design allows seamless integration into a variety of stage and studio environments.
Built for durability and flexibility, the TG D71 features an integrated pre-amp and supports phantom power from 11V to 52V. With a frequency range of 25Hz to 20,000Hz, high impulse fidelity, and maximum SPL handling up to 148dB, it excels in both live and studio applications. Its rugged housing withstands the demands of touring, and the red status LED provides instant visual confirmation of phantom power. For permanent installations, mounting holes on the underside provide secure placement options, making the TG D71 a versatile solution for demanding low-end recording tasks.
FEATURES:
- Condenser boundary microphone for kick drums and percussion
- Half-cardioid polar pattern for controlled pickup
- Compact, slim design with rugged housing
- Non-slip rubber base prevents shifting during use
- Integrated pre-amp with phantom power operation
- Handles up to 148dB SPL without distortion
- High impulse fidelity with natural low-end sound
- Red LED indicator shows phantom power status
- 24 month limited warranty covering defects in materials and workmanship
- 3 month limited warranty on included cables
SPECIFICATIONS:
Transducer Type: | Condenser (back electret) |
Operating Principle: | Pressure gradient |
Polar Pattern: | Half-cardioid |
Frequency Response: | 25Hz to 20,000Hz |
Open Circuit Voltage: | 1.5mV/Pa (-56dBV) |
Nominal Impedance: | <200ohms |
Load Impedance: | ≥1000ohms |
Max SPL at 1kHz: | 148dB (1% THD) |
Signal-to-Noise Ratio: | 63dB (A, RMS) / 50dB (CCIR, Q-Peak) |
Noise Voltage: | 1.1µV (A, RMS) / 4.9µV (CCIR, Q-Peak) |
A-weighted Equivalent SPL: | 31.2dB |
Polarity: | Positive pressure produces positive voltage on pin 2 relative to pin 3 |
Wiring: | Balanced, 3-pin XLR male |
Connection: | XLR, 3-pin, male |
Power Supply: | Phantom power P48 (+48VDC ±4VDC), P24 (+24VDC ±4VDC), or P12 (+12VDC ±4VDC) |
Current Consumption: | <3.2mA |
Dimensions (L x W x H): | 90 x 86 x 27mm |
Weight: | 413g |