FREE SHIPPING
On most orders over $35.
ATI Amplifier Technologies - AT52XNC Series - Class D Power Amplifier
Retail Price: $2,395.00
Your Price: $2,295.00
SKU
AT52XNC
This product is currently on backorder until approximately summer 2023. For purchase info please Message us, or call 877-370-1972. Thank you!
Discount:
Shipping:
ATI Amplifier Technologies - AT52XNC Series - Class D Power Amplifier is available to buy in increments of 1
ATI Amplifier Technologies - AT52XNC Series - Class D Power Amplifier
Amplifier Technologies, Inc., the prolific manufacturer of many of the high end audio’s amplifiers has the best selling series of amplifiers N-Core amps. The AT5XXNC amplifiers use Hypex N-Core Class D output modules with ATI designed input buffers and linear power supplies and are available with two power configurations. The AT52XNC amps are rated at 200W RMS per channel at 8 ohms with 300W RMS at 4 ohms and are available with 2 to 8 channels.
These AT5XXNC series amplifiers break new ground in other ways. They are the first ATI amplifiers to use micro-processor control for turn-on delay and feature automatic AC power recognition and configuration. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure. The amplifiers also incorporate a new and novel “sleep” circuit. When the amplifier receives no input signal for a period of 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected on any channel, normal playback operation resumes instantaneously.
Per Morris Kessler, ATI’s president and chief engineer, “We are excited to offer amplifiers with ATI’s legendary high performance and reliability in designs that reduce amplifier weight by up to 50%.”. And, with rated distortion below 0.05% and signal-to-noise ratio of 123 dB (minimum, referenced to rated output), each amplifier in the series is capable of playing back the full dynamic range available on today’s lossless recordings.
All NC Series Amplifiers are Class D using N-Core Technology and Linear Power Supplies with Automatic 117 / 230 Voltage selection in a 3 RU chassis.
Each ATI piece is custom built to order. Please allow approximately 2 weeks for manufacturing and shipping.
The NC500 silver faceplates is custom order and available upon request in limited quantities.
Note: We can only ship to addresses within the USA. Visit ATI-AMP.com for a list of International Dealers.
FEATURES :
- Remote Trigger - Activated from 3.3VDC to 24 VDC via a heavy-duty relay
- Bottom panel ventilation
- Protection Circuits - Optically - coupled with full automatic reset
- Toroid Transformers - 40% more efficient than EI type. Each transformer has two bi-filar windings to assure low noise and cross-talk
- Circuit Boards - Double-sided, FR-4 glass-epoxy, computer-grade boards are assembled in-house
- Soft Start Circuitry - New micro-processor controlled turn-on board first ascertains input voltage and configures transformers for 120V or 230V operation then ultra soft turn-on timers reduce in-rush current to a minimum. Multiple units can be turned on without tripping circuit breakers eliminating the need for sequencing
- Amplifier Output - Hypex N-Core NC-500 Class D amplifier modules with ATI's custom input buffer insures edge-of-the-art operation
- Power Cord - 20A IEC power inlet with detachable, 3-wire cord
- 7-Year Warranty - Parts and labor against defects in parts or workmanship
SPECIFICATIONS:
Series
AT52XNC
Number of Channels
2 to 8
EIA 1kHz Output Power at 8 Ohms*
250 Watts
EIA 1kHz Output Power at 4 Ohms*
375 Watts
FTC Full Bandwidth Output Power at 8 Ohms**
200 Watts
FTC Full Bandwidth Output Power at 4 Ohms**
300 Watts
Input Sensitivity for Full Rated Power
1.6 Volts
Frequency Response at Rated Output
20Hz to 20kHz +0, -.5dB
Phase Response
+5 to -15 degrees from 20Hz to 20kHz at 1 watt
Signal-to-Noise Ratio “A-Weighted”
Greater than 123dB below rated FTC Full Bandwidth Output
Total Harmonic Distortion (THD)
Less than 0.02% at full rated FTC power
Intermodulation Distortion (IMD)
Less than 0.03% at full rated FTC power
Load Impedance
Safe with all types of loads. Rated for 4 to 16 ohms
Power Bandwidth FTC
+0, -3 db from 20 Hz to 40 kHz
Damping Factor
Greater than 5000 from 10 Hz to 400 Hz
Crosstalk
Greater than 100 dB from 20 Hz to 20 kHz
Voltage Gain through RCA
27.8dB ±0.2 dB
Voltage Gain through XLR
27.8dB ±0.2 dB
Slew Rate
>60 V/µs
Input Impedance
Nominally 47 KOhms
Remote Trigger Voltage
3.3 to 24 Volts DC at 5 mA or greater
DC Output Offset
Less than ±10 mV
Power Requirements
120 VAC / 230 VAC (other voltages available on export models)
Chassis Dimensions (W x H x D) Inches
17 x 5 3/4 x 10 5/8 (2-4 Channels)
17 x 5 3/4 x 15 1/2 (5-8 Channels)
Net Weight (lbs/kg) Model Dependent
39 to 66 / 18 - 30
Shipping Weight (lbs/kg) Model Dependent
49 to 76 / 23 to 35
Write Your Own Review
