Price Match Guarantee!
We guarantee to match any
price from authorized dealers
Authorized Dealer
You can be sure to get 100%
genuine product from us!
30 Day Return Policy
We offer a full 30 days
money back guarantee!
In stock: Available
Be the first to review this product


Already marked down to our lowest price


Free shipping available on this item

Please call 1-877-370-1972 or send us an email at for more information.

Transient Protection Design - TPD-CAT6 - Data Network Surge Protection is available to buy in increments of 1

Transient Protection Design - TPD-CAT6 - Data Network Surge Protection

Transient Protection Design - TPD-CAT6 - Data Network Surge Protection

The TPD-CAT6 units offer the highest quality data line protection available. Strategically protect data pathways that are connected to the network. Installing a TPD-CAT6 will reduce damage caused by surges that enter on these pathways and destroy routers, hubs, and network devices.

Installing a TPD-CAT6 surge suppression product on Ethernet wires that leave the house will assure that damaging transients and surges do not enter into these lines and destroy electronics inside the home. Units should be installed as the wires leave the house assuring that the network and its wiring are protected inside the house. Lightning will not only destroy electrical equipment but it can also destroy wiring. Protecting outdoor equipment is accomplished by placing a unit in front of the outdoor hub or router.


  • Surge Suppressor & Lightning Protection
  • Network devices and baluns communicating <1Gb
  • 1080P High Definition Compatible: Yes
  • Max Data Rate: <1Gbps
  • Solid state fail-safe design
  • Three Year Unlimited Free Replacement Warranty
  • Operating Voltage: 6.3V/56V POE
  • Response Time: < 1 nanosecond
  • Strength: 1500 watts per wire; 6000 watts per unit
  • Din rail or screw down mount indoors or in enclosure if exposed to weather
  • F Type male connection accepts RG6 or RG11


Data systems with <1Gbps and <100Mhz

Solid State fail-safe design

3-Year Unlimited Free Replacement

Wires Protected
All wires.

Response Time
< 1 nanosecond

1500 Watts Per Wire; 6000 Watts Per Unit

Number of Protected Pairs (Wires)
4 Pair (8 wire)

Dimensions TPD-CAT6 & POE
2.28”H x 1.40”W x 2.28”D

Dimensions TPD-CAT6-S & POE-S
1.25”H x 1.25”W x 0.65”D

Enclosure Type
High-impact, non-metallic UL 94-5V flame resistant rated

Connection Method TPD-CAT6 and POE
RJ45 In/Out (RJ45 female connections on both sides). Bidirectional, not in/out sensitive.

Connection Method TPD-CAT6-S and POE-S
(1) RJ45 female connection (1) RJ45 male connection. Bidirectional, not in/out sensitive.

Operating Temperature
-40° C to 85° C (-40° F to 185° F)

0.3 lbs. (0.13 kg)

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account