FREE SHIPPING
On most orders over $35.
iFi Audio - xCAN - Portable Bluetooth Headphone Amp
SKU
iFi-xCAN
SPECIAL ORDER: For availability and purchase information please send us a message. Or, call 877-370-1972. Thank you.
|
|
|
|
iFi Audio - xCAN - Portable Bluetooth Headphone Amp is available to buy in increments of 1
No further discounts or coupons apply.
FREE delivery OVER $35 (USA ONLY)
30-day return
iFi Audio - xCAN - Portable Bluetooth Headphone Amp
The xCAN simply makes your music sound better, whether you are listening via ear buds at home or chilling with tunes on the go.
This portable headphone amplifier is sure to give your music a superior sound.
The xCAN is a portable amplifier above all else and is for anyone who wants to squeeze every last drop of performance out of their expensive headphones.
Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice?
Just add the xCAN to drive bigger and better headphones and boost your tunes.
Blinding Bluetooth
The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic.
Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side.
Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory.
Wicked wiring
Connect via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.
On headphones this means lower distortion, less interference and less crosstalk.
And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs.
A pure power house
The xCAN is a dual-mono headphone amplifier with 1000mW of power per channel. It will happily drive your favourite headphones.
And iFi added their signature sonic extras as well.
3D+® opens up your music to give you the spaciousness of a live-concert atmosphere.
The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies.
Clever. Curvy
The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey!
And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady.
FEATURES:
- Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and the intelligent memory buffer. The low-jitter crystal clock has been updated to provide >20dB better performance
- The unit boasts a dual-mono headphone amplifier with 1000mW of power per channel which can unleash the full potential of both 32ohm through to 600ohm headphones. It offers balanced in/out to take full advantage of the growing availability of balanced sources and headphones. The 2.5mm balanced headphone jack means the it can be used to boost the amplification of high-end DAPs.
- This unit features the iFi Cyberdrive® headphone amplifier stage. You won’t find it in Star Wars or Star Trek. Unravel its mysteries here.
- The 3D+ Holographic® delivers an immersive, deep soundstage. Our new XBass Ⅱ® adds even more musical satisfaction. The XBass Ⅱ® analog bass correction system corrects headphone bass response to deliver a more natural sound to the upper bass frequency band. More here.
- With a separate power input (USB Type C) to charge the internal battery, it does not draw from your smartphone or playback device. Playback time is 12 (via Bluetooth® as input) to 18 (as analog amplifier only) hours.
- iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.
- Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and intelligent memory buffer. This represents a total ‘out-of-the-box’ systematic digital solution that solves jitter once and for all.
TUTORIAL VIDEO
SPECIFICATIONS:
Max Output
S-Balanced: > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
This Rating not tested under the FTC Standard
Balanced: > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm
This Rating not tested under the FTC Standard)
Inputs
Wireless: ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
Wired: 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
*ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.
No USB audio input
THD & N
S-Balanced: < 0.005% (@ 100 mW/1.26V 16 Ohm)
Balanced: < 0.006% (@ 360 mW/2.4V 16 Ohm)
SNR
S-Balanced: > 121dBA (@ 3.8V)
Balanced: >120dBA (@ 7.6V)
Recommended HP Impedance
16~600 Ohm
Output impedance
S-Balanced: <1 Ohm
Balanced: <2 Ohm
Max. Input
S-Balanced: 3V RMS
Balanced: 6V RMS
Gain
-95dB to +18dB adjustable in 114 1dB steps (using volume control)
Frequency Response
< 2Hz – > 200kHz (-3dB)
Playback Time
18 hours (analog) or 2 hours (Bluetooth) (charging via USB port)
Dimensions
95 (l) mm x 67 (w) mm x19 (h) mm
Weight
127g (0.28 Ibs)
Warranty period
12 months
Write Your Own Review