Grado - Replacement Opus3 - Timbre Series Diamond Stylus
This is a special order item with a 1-2 weeks processing time. Phono cartridges & Styli are not returnable. If found defective, by the manufacturer, they can only be exchanged.
Grado - Replacement Opus V3 - Timbre Series Diamond Stylus
This series generator/stylus module is not replaceable allowing a redesigned one-piece magnetic circuit and a reduction of chassis resonances. The Timbre Series3 utilizes manufacturing and assembly techniques that result is musical perfection. The Timbre Series V3 should be used with only the finest equipment.
The Timbre Series utilizes manufacturing and assembly techniques of fantastic accuracy and precision, and the result is virtual perfection. The Opus V3 Phono Cartridge should be used only with the finest equipment. The recommended tracking force is 1.6 to 1.9 grams.
The Opus3 model uses a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils.
The Opus model uses Grado's specially designed elliptical diamond mounted on an aluminum bushing, and the Sonata model uses Grado's specially designed nude elliptical diamond
Note: This item is for the stylus only. The full cartridge (which includes the Stylus) can be seen above in the Accessories listing.
- Fixed-Coil Design
- Hand-Assembled at Grado Labs (Brooklyn, NY USA)
- Made of Australian Jarrah Wood
- One-piece Magnet Circuit
- Four-piece OTL Cantilever Technology
- 10% Tip Mass-Reduction over the Prestige Series of cartridges
- Ultra-High Purity Long Crystal (UHPLC) Oxygen-Free Copper Wire
- 1/2" Mount Wooden Cartridge
- Elliptical Diamond mounted on Aluminum Bushing
Aluminum / Elliptical Diamond
High 4.0mV @5 CMV (45)
Low 1.0mV @5 CMV (45)
Average 30 dB - 10-30 KHZ
High Output 55mH
Low Output 6mH
High Output 660 ohms
Low Output 70 ohms
Channel Separation at 1 KHz
Average 30dB - 10 - 30k Hz
10K - 47K ohms
Stylus Replacement Manufacturer
Grado Labs Factor (Brooklyn, NY)