FREE SHIPPING
On most orders over $35.
ATI Amplifier Technologies - AT1820 Series - Class AB Power Amplifier
Retail Price: $1,595.00
Your Price: $1,495.00
SKU
AT1820Series
Each ATI piece is custom built to order. Please allow approximately 2 weeks for manufacturing and shipping. For purchase info please Message us, or call 877-370-1972. Thank you!
Discount:
Shipping:
ATI Amplifier Technologies - AT1820 Series - Class AB Power Amplifier is available to buy in increments of 1
ATI Amplifier Technologies - AT1820 Series - Class AB Power Amplifier
At 200W RMS per channel, the AT1820 Series provides the best price to performance ratio of any amplifiers available. The AT1820 Series comprises six amplifier models. The series starts with the 2-channel AT1822 and finishes with the 7-channel AT1827.
The AT1820 Series amps are passively cooled by large heat sinks. This feature may be especially important in small home theater systems that can not hide the equipment in a rack or closet.
An optically-coupled protection circuit automatically shuts down the amplifier in an overload situation, such as when someone accidentally shorts out the amp. Once the protection circuit is engaged, it checks the conditions regularly and restores output automatically when the overload situation is remedied. Since the protection circuit is optically coupled to the audio circuit, there is no direct electrical connection for the protection circuit to affect sound quality. A magnetic circuit breaker provides further protection.
The AT1820 Series amps use the same transformer construction as the top-of-the-line AT6000 and AT4000 Series amps. It also uses double-sided glass epoxy circuit boards and the same rugged, powder-coated chassis used in all our products.
The AT1820 Series amps include ATI’s Ultra Soft Turn-On circuit. This circuit gradually powers up the amp and will not trip your household circuit breaker or dim the lights when you switch it on. The amps also include a trigger input that allows it to be turned on and off, remotely.
Note: We can only ship to addresses within the USA. Visit ATI-AMP.com for a list of International Dealers.
FEATURES :
- Convection Cooling with Massive Heat Sinks
The AT1820 Series uses large extruded large heat sinks, one for each amplifier channel. - Huge Toroidal Transformers
The huge transformers used in ATI amplifiers employ high-grade silicon steel cores with bi-filar windings. To reduce crosstalk through the transformer, each amplifier channel gets its own set of secondary transformer windings. - Remote Triggers
All ATI amplifiers feature a 12V trigger that allows them to interface with control systems or processors so they can be turned on and off remotely. - Optical Protection Circuitry
This safety feature instantaneously stops current from flowing in the amplifier’s output under three conditions; 1) an over-current / short circuit condition, 2) high-frequency oscillation & 3) over-temperature condition. If activated, this circuit will sample the condition every 10 seconds and restore output when the problem is cleared. In case of an excessive DC offset on any channel, the chassis will shut down and power will need to be cycled to restore operation. - Ultra-Soft Turn-On
High power amplifiers draw a momentary - but tremendous - in-rush of electrical current when you turn them on. This will not happen because of ATI’s Ultra Soft Turn-On circuitry. - Low Distortion/Low Noise
The exact “nature” of sound is a matter of individual choice and environmental conditions, however, distortion and noise are absolutely measurable in any situation. All ATI amps are at the “cutting edge” of the lowest distortion and noise possible. - Amplifier Topology
While there are numerous classes of amplifier design, the AT1820 Series amplifiers use the traditional Class-AB topology.
SPECIFICATIONS:
Analog Audio Inputs
One Single-ended (RCA) jack per channel & One Balanced (XLR) jack per channel
Slide Switch to choose jack
Input Impedance
28 kΩ Nominal
Input Sensitivity
1.6 Volts for rated power Into 8 ohms
Gain
28dB
Polarity
(Single-Ended) Non-Inverting
Balanced; Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output
Speaker Output
Binding posts; 1 pair per channel
Mode / Process
Standby: Amplifier is ready to be turned on via front panel switch or remote trigger.
Overcurrent, D.C., and/or thermal protection: Amplifier will cycle.
Catastrophic D.C. or output stage failure: Amplifier will shut down.
Power Output - 8 ohms
Per Channel
20 Hz-20 kHz, < 0.03% THD
200W
1 kHz, 0.005% THD, (Watts)
250W
Power Output - 4 ohms
Per Channel
20 Hz-20 kHz, < 0.075% THD
300W
1 kHz, 0.015% THD, (Watts)
375W
Distortion - 8 ohms
THD + N, 20 Hz - 20 kHz
< 0.03%
THD + N @ 1 kHz, 1W
< 0.005%
Intermodulation Distortion
Less than 0.03%
(SMPTE or Twin-tone)
Frequency Response
+0, -.5 dB, 5 Hz to 20 kHz, load independent
Damping Factor - 8Ω load
> 400 from 10Hz to 400Hz
Signal to Noise Ratio
> 120dB (A-Weighted - Ref. 8Ω FTC Power)
Slew Rate
> 50V / μS
Crosstalk
> -100dB from 20Hz - 20kHz
Trigger Input
3.3-24 VDC; Steady State Tip Positive
Dimensions (W x H x D)
AT1827, AT1826, AT1825
17” x 7 3/4” x 17 5/8” (432 mm x 196 mm x 448 mm)
AT1824, AT1823, AT1822
17” x 7 3/4” x 14 5/8” (432 mm x 196 mm x 372 mm)
Weight (lbs. / kg)
AT1827: Amp - 95.2 / 43.3 , Shipping - 107 / 48.6
AT1826:
AT1825: Amp - 77 / 35 , Shipping - 92 / 41.8
AT1824:
AT1823: Amp - 52.1 / 23.7 , Shipping - 58 / 26.4
AT1822: Amp - 44.25 / 20.1 , Shipping - 51 / 23.2
Write Your Own Review