A precise, two-way switch utilizing RCA connectors, especially suited to phono applications. Because most other switches are really designed for high-level, or "Aux" levels, they introduce hum and other noises when used with the extremely low levels produced by phono cartridges.
This switcher can be used to switch either of two phono turntables to the input phono of a h... Read more...
Modern stereo preamplifiers use RIAA equalization to play back standard phonograph records. Playback of most of vintage records on modern, even expensive amplifiers, is effectively using a 2 KHz lo-cut filter with either excessive or insufficient bass boost. Many, if not most CD reissues of 78's and old radio shows, along with many of the tapes of old recordings in the files of m any collectors, were made with modern RIAA preamps. The Re-Equalizer will accurately compensate your RIAA equalize... Read more...
Description:
One of the greatest problems with turntables are their inability to reject vibration well. A recent technology in materials to address has been the use of "SorboGel" - an extremely pliable yet inert rubber like material. Audioquest SorboGel Q-FEET provide exceptional damping and isolation to improve the performance of turntables, CD players and all vibration-sensitive equipment. ... Read more...
Description:
Available in either 60 Hz or 50 Hz versions. This refers to the power line frequency in your area. For instance, in the USA it is 60 Hz. Often, in Europe it is 50 Hz.
This strobe will measure the following speeds: 16.67/33.33/45/70.59/71.29/76.59/78/
80/81.82/85/90 RPM. Made from study thin gauge cardboard. Read more...
The Surface Noise Reducer eliminates or reduces the clicks and pops found on most types of phonograph records. Its circuit topology employs the latest in modern digital integrated circuits and a design algorithm which can identify and remove many clicks and pops found on Lp's and
even 78's and other vintage records. It can often improve the quality grade of records by several grades. It will cause minimum degradation to either audiophile or vintage records and is suitable for inclusion ... Read more...
This headshell is made specifically for the TranScribe tonearm, but will fit most others. This Precision magnesium headshell has multi-stranded cartridge cabling (Litz wire), adjustable azimuth, and gold flashed connectors and arm pins. Instead of one alignment pin at the top of the connector, it has two; another at the bottom. Weight 11.5 grams. Read more...
Roksan - Caspian Series DC Power Supply (DS1.5)
There are two options:
-DX2/DSU Standard Speed Control
-DX2/DS1.5 Reference Speed Control
TMS3 already has the reference motor drive integral with in the unit. It only requires a DC supply to power its internal reference motor drive. Read more...
Roksan - Caspian Series DC Power Supply (DUS)
There are two options:
-DX2/DSU Standard Speed Control
-DX2/DS1.5 Reference Speed Control
TMS3 already has the reference motor drive integral with in the unit. It only requires a DC supply to power its internal reference motor drive. Read more...
The Roksan Two Stage Micro Fibre Record Cleaner provides optimum cleaning of your record’s surface and groove.
The front brush ensures general cleaning of the record surface and the groove while the rear brush cleans the remaining dirt.
Specifications:
Cleaning Element: Two Stage Micro Fibre
Replaceable Fibre Element Kit: 2mm Dense & 4.5mm Open
Replacement kit comprises ... Read more...
Roksan Audio's entry level speed control power supply is designed for use with the the whole Xerxes range. In line with Roksan Audio’s commitment to offer continuous upgrades and improvements the XPS7 can replace the older XPS1 units, offering significant improvement in speed and rhythm control. As an alternative to total replacement of XPS1 to XPS7, you can choose to have your XPS1 box upgraded with a factory fitted XPS7 board.
Read more...
ANALORD tonearm cables are designed exclusively to handle low level analog signals such as the micro-volt outputs of MM/MC cartridges. The extremely slight and fragile properties of these types of signals are often not transmitted adequately and can easily be distorted by standard line-level interconnects. Carefully designed conductor, dielectric and geometry parameters are essential in protecting delicate signal integrity; preserving and accurately conveying all the musical informatio... Read more...
ANALORD PRIME tonearm cables are designed exclusively to handle low level analog signals such as the micro-volt outputs of MM/MC cartridges. The extremely slight and fragile properties of these types of signals are often not transmitted adequately and can easily be distorted by standard line-level interconnects. Carefully designed conductor, dielectric and geometry parameters are essential in protecting delicate signal integrity; preserving and accurately conveying all the musical info... Read more...
A/V Receivers
Amplifiers
